Mi Power Bank 5.000mAh
Một số lưu ý khi mua sản phẩm PIN sạc dự phòng: 1. Cell PIN và hiệu năng sử dụng: PIN sạc dự phòng có dung lượng định mức tương ứng với điện áp 3.6V (Li-ion) hoặc 3.8V (Li-Po). Khi sạc ra cho các thiết bị có điện áp 5V (hiệu điện thế tăng thì dòng điện sạc ra sẽ giảm), dung lượng sạc ra sẽ đạt khoảng 65% ~ 80% dung lượng định mức ở điện áp 3.6V hoặc 3.8V VD: iPhone 5 có dung lượng PIN là 1560mAh, 70% của PIN 2.200mAh tương đương với khoảng 1540mAh, như vậy PIN 2.200mAh có thể sạc gần đầy iPhone 5 trong điều kiện iPhone 5 không có ứng dụng chạy ngầm trong quá trình sạc 2. Mạch và dòng sạc Tất cả các PIN dự phòng chính hãng hiện nay đều có cổng sạc ra tự động đáp ứng dòng điện phù hợp với nhu cầu thiết bị. Lưu ý các thiết bị dung lượng PIN lớn sẽ cần cổng sạc ra 2A max hoặc 2.4A max. Nếu dòng ra không đủ, thời gian sạc sẽ rất lâu hoặc có thể không đầy PIN |
- Model: NDY-02-AM
- Công nghệ PIN: Li-Polymer
- Điện áp vào: DC 5.0V === 2A max
- Điện áp r: DC 5.1V === 2.1A max
- Dung lượng PIN: 5.000mAh
- Thời gian sạc: 3.5 tiếng với nguồn sạc 2A max
- Kích thước: 125 * 69 * 9.9mm (siêu mỏng)
- Trọng lượng: 156g (siêu nhẹ)
Hướng dẫn phân biệt PIN XIAOMI chính hãng
5000mAhMi Power Bank
ATL/Lishen lithium-ion polymer battery cells in a super slim 9.9mm aluminum case, our thinnest yet.
Super slim 9.9mm caseSo thin, you won't know it's in your pocket
Keep things light. The 5000mAh power bank is designed for everyday use. Stash it in your bag or pocket - it's so slim you won't even know it's there.
Slimmer, safer chargingPremium lithium-ion polymer batteries
Sourced from reputable suppliers such as ATL, premium lithium-ion polymer battery cells add 5000mAh of battery life to your smartphone, tablet or digital camera.
- 1full charge for
Redmi Note 4G - 1.8full charges for iPhone 6
- 2.2full charges for iPhone 5s
* Lab test results. Actual usage may vary.
World-class chipset protectionNine layers of circuit protection, built by Texas Instruments
Mi Power Bank’s adopted USB smart-control and charging/discharging chips from Texas Instruments provide nine layers of circuit chip protection while enhancing efficiency.
-
Temperature Resistance
Heat-sensitive and temperature control mechanisms ensure Li-ion batteries operate within a safe range.
-
Short-circuit protection
The motherboard and battery are automatically protected if short circuit occurs.
-
Reset Mechanism
Reset the power bank if it stops responding by simply pressing the Power button.
-
Input Over-Voltage Protection
OVP circuit prevents voltage surges from damaging the device.
-
Automatic Charger Protection
Detects when the charger is inserted incorrectly and will automatically stop charging.
-
Output Overcurrent Protection
Monitors output current and shuts off when current exceeds the maximum limit to protect the device.
-
Output Overvoltage Protection
Monitors output voltage and shuts off when voltage exceeds the maximum limit to protect the device.
-
Overcharge and Over-discharge protection
Japanese technology is used to prevent overcharging and over-discharging from damaging the Li-ion batteries.
-
PTC Protective Circuits for the Cell
Imported battery cells are equipped with PTC to effectively control and protect batteries when temperature and current exceed the maximum limit.
Optimized charging/discharging efficiencyUp to 93% conversion rate
World-class chips built into the power bank are not only safer, but improve charging conversion rate and stabilize discharging voltage with advanced resistance-capcitance sensors to optimize efficiency and durability.
- Added100Rounds
- Increased10%power output efficiency
- Up to93%conversion rate
- Minimum3300mAhactual output
* Test conditions for output capacity: 5V/1A output, 25℃
Plays well with othersCompatible with a wide range of devices
Mi Power Bank automatically adjusts its output level based on the connected device. It is compatible with smartphones and tablets from Mi, Apple, Samsung, HTC, Google, and BlackBerry, as well as a variety of digital cameras and handheld gaming devices.
-
Smooth edges
Ergonomically friendly and easy to hold.
-
Anodizing process
Creates a stronger surface that is resistant to fading, wear, and corrosion.
-
Naturally indented button
A slightly indented button resets the device with a simple touch.
- Indicator Lights
- Power Check
- Micro USB port (input)
- USB port (output)
Protective CasingBeautifully textured aluminum surface
Made from a single piece of aluminum, each casing is formed by high-precision CNC digital cutting. The water and corrosion-resistant surface is rigidly designed for everyday use.
- 50kgPressure limit
- 300timesRub test
Every authentic 5,000mAh Mi Power Bank comes with an authentication label on its exterior packacing. To verify authenticity, just scratch off the coating on the label, then enter the security code in the official verification website: mi.com/verify.
5000mAhMi Power Bank
ATL/Lishen lithium-ion polymer battery cells in a super slim 9.9mm aluminum case, our thinnest yet.